Struct core::sync::atomic::AtomicUsize [] [src]

pub struct AtomicUsize {
    // some fields omitted
}

An unsigned integer type which can be safely shared between threads.

Methods

impl AtomicUsize

const fn new(v: usize) -> AtomicUsize

Creates a new AtomicUsize.

Examples

fn main() { use std::sync::atomic::AtomicUsize; let atomic_forty_two = AtomicUsize::new(42); }
use std::sync::atomic::AtomicUsize;

let atomic_forty_two = AtomicUsize::new(42);

fn load(&self, order: Ordering) -> usize

Loads a value from the usize.

load takes an Ordering argument which describes the memory ordering of this operation.

Panics

Panics if order is Release or AcqRel.

Examples

fn main() { use std::sync::atomic::{AtomicUsize, Ordering}; let some_usize = AtomicUsize::new(5); assert_eq!(some_usize.load(Ordering::Relaxed), 5); }
use std::sync::atomic::{AtomicUsize, Ordering};

let some_usize = AtomicUsize::new(5);

assert_eq!(some_usize.load(Ordering::Relaxed), 5);

fn store(&self, val: usize, order: Ordering)

Stores a value into the usize.

store takes an Ordering argument which describes the memory ordering of this operation.

Examples

fn main() { use std::sync::atomic::{AtomicUsize, Ordering}; let some_usize = AtomicUsize::new(5); some_usize.store(10, Ordering::Relaxed); assert_eq!(some_usize.load(Ordering::Relaxed), 10); }
use std::sync::atomic::{AtomicUsize, Ordering};

let some_usize = AtomicUsize::new(5);

some_usize.store(10, Ordering::Relaxed);
assert_eq!(some_usize.load(Ordering::Relaxed), 10);

Panics

Panics if order is Acquire or AcqRel.

fn swap(&self, val: usize, order: Ordering) -> usize

Stores a value into the usize, returning the old value.

swap takes an Ordering argument which describes the memory ordering of this operation.

Examples

fn main() { use std::sync::atomic::{AtomicUsize, Ordering}; let some_usize= AtomicUsize::new(5); assert_eq!(some_usize.swap(10, Ordering::Relaxed), 5); assert_eq!(some_usize.load(Ordering::Relaxed), 10); }
use std::sync::atomic::{AtomicUsize, Ordering};

let some_usize= AtomicUsize::new(5);

assert_eq!(some_usize.swap(10, Ordering::Relaxed), 5);
assert_eq!(some_usize.load(Ordering::Relaxed), 10);

fn compare_and_swap(&self, current: usize, new: usize, order: Ordering) -> usize

Stores a value into the usize if the current value is the same as the current value.

The return value is always the previous value. If it is equal to current, then the value was updated.

compare_and_swap also takes an Ordering argument which describes the memory ordering of this operation.

Examples

fn main() { use std::sync::atomic::{AtomicUsize, Ordering}; let some_usize = AtomicUsize::new(5); assert_eq!(some_usize.compare_and_swap(5, 10, Ordering::Relaxed), 5); assert_eq!(some_usize.load(Ordering::Relaxed), 10); assert_eq!(some_usize.compare_and_swap(6, 12, Ordering::Relaxed), 10); assert_eq!(some_usize.load(Ordering::Relaxed), 10); }
use std::sync::atomic::{AtomicUsize, Ordering};

let some_usize = AtomicUsize::new(5);

assert_eq!(some_usize.compare_and_swap(5, 10, Ordering::Relaxed), 5);
assert_eq!(some_usize.load(Ordering::Relaxed), 10);

assert_eq!(some_usize.compare_and_swap(6, 12, Ordering::Relaxed), 10);
assert_eq!(some_usize.load(Ordering::Relaxed), 10);

fn fetch_add(&self, val: usize, order: Ordering) -> usize

Add to the current usize, returning the previous value.

Examples

fn main() { use std::sync::atomic::{AtomicUsize, Ordering}; let foo = AtomicUsize::new(0); assert_eq!(foo.fetch_add(10, Ordering::SeqCst), 0); assert_eq!(foo.load(Ordering::SeqCst), 10); }
use std::sync::atomic::{AtomicUsize, Ordering};

let foo = AtomicUsize::new(0);
assert_eq!(foo.fetch_add(10, Ordering::SeqCst), 0);
assert_eq!(foo.load(Ordering::SeqCst), 10);

fn fetch_sub(&self, val: usize, order: Ordering) -> usize

Subtract from the current usize, returning the previous value.

Examples

fn main() { use std::sync::atomic::{AtomicUsize, Ordering}; let foo = AtomicUsize::new(10); assert_eq!(foo.fetch_sub(10, Ordering::SeqCst), 10); assert_eq!(foo.load(Ordering::SeqCst), 0); }
use std::sync::atomic::{AtomicUsize, Ordering};

let foo = AtomicUsize::new(10);
assert_eq!(foo.fetch_sub(10, Ordering::SeqCst), 10);
assert_eq!(foo.load(Ordering::SeqCst), 0);

fn fetch_and(&self, val: usize, order: Ordering) -> usize

Bitwise and with the current usize, returning the previous value.

Examples

fn main() { use std::sync::atomic::{AtomicUsize, Ordering}; let foo = AtomicUsize::new(0b101101); assert_eq!(foo.fetch_and(0b110011, Ordering::SeqCst), 0b101101); assert_eq!(foo.load(Ordering::SeqCst), 0b100001); }
use std::sync::atomic::{AtomicUsize, Ordering};

let foo = AtomicUsize::new(0b101101);
assert_eq!(foo.fetch_and(0b110011, Ordering::SeqCst), 0b101101);
assert_eq!(foo.load(Ordering::SeqCst), 0b100001);

fn fetch_or(&self, val: usize, order: Ordering) -> usize

Bitwise or with the current usize, returning the previous value.

Examples

fn main() { use std::sync::atomic::{AtomicUsize, Ordering}; let foo = AtomicUsize::new(0b101101); assert_eq!(foo.fetch_or(0b110011, Ordering::SeqCst), 0b101101); assert_eq!(foo.load(Ordering::SeqCst), 0b111111); }
use std::sync::atomic::{AtomicUsize, Ordering};

let foo = AtomicUsize::new(0b101101);
assert_eq!(foo.fetch_or(0b110011, Ordering::SeqCst), 0b101101);
assert_eq!(foo.load(Ordering::SeqCst), 0b111111);

fn fetch_xor(&self, val: usize, order: Ordering) -> usize

Bitwise xor with the current usize, returning the previous value.

Examples

fn main() { use std::sync::atomic::{AtomicUsize, Ordering}; let foo = AtomicUsize::new(0b101101); assert_eq!(foo.fetch_xor(0b110011, Ordering::SeqCst), 0b101101); assert_eq!(foo.load(Ordering::SeqCst), 0b011110); }
use std::sync::atomic::{AtomicUsize, Ordering};

let foo = AtomicUsize::new(0b101101);
assert_eq!(foo.fetch_xor(0b110011, Ordering::SeqCst), 0b101101);
assert_eq!(foo.load(Ordering::SeqCst), 0b011110);

Trait Implementations

impl Default for AtomicUsize

fn default() -> Self

impl Sync for AtomicUsize

impl Debug for AtomicUsize

fn fmt(&self, f: &mut Formatter) -> Result