Trait std::iter::Iterator

pub trait Iterator {
    type Item;
    fn next(&mut self) -> Option<Self::Item>;

    fn size_hint(&self) -> (usize, Option<usize>) { ... }
    fn count(self) -> usize { ... }
    fn last(self) -> Option<Self::Item> { ... }
    fn nth(&mut self, n: usize) -> Option<Self::Item> { ... }
    fn chain<U>(self, other: U) -> Chain<Self, U::IntoIter> where U: IntoIterator<Item=Self::Item> { ... }
    fn zip<U>(self, other: U) -> Zip<Self, U::IntoIter> where U: IntoIterator { ... }
    fn map<B, F>(self, f: F) -> Map<Self, F> where F: FnMut(Self::Item) -> B { ... }
    fn filter<P>(self, predicate: P) -> Filter<Self, P> where P: FnMut(&Self::Item) -> bool { ... }
    fn filter_map<B, F>(self, f: F) -> FilterMap<Self, F> where F: FnMut(Self::Item) -> Option<B> { ... }
    fn enumerate(self) -> Enumerate<Self> { ... }
    fn peekable(self) -> Peekable<Self> { ... }
    fn skip_while<P>(self, predicate: P) -> SkipWhile<Self, P> where P: FnMut(&Self::Item) -> bool { ... }
    fn take_while<P>(self, predicate: P) -> TakeWhile<Self, P> where P: FnMut(&Self::Item) -> bool { ... }
    fn skip(self, n: usize) -> Skip<Self> { ... }
    fn take(self, n: usize) -> Take<Self> { ... }
    fn scan<St, B, F>(self, initial_state: St, f: F) -> Scan<Self, St, F> where F: FnMut(&mut St, Self::Item) -> Option<B> { ... }
    fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F> where F: FnMut(Self::Item) -> U, U: IntoIterator { ... }
    fn fuse(self) -> Fuse<Self> { ... }
    fn inspect<F>(self, f: F) -> Inspect<Self, F> where F: FnMut(&Self::Item) -> () { ... }
    fn by_ref(&mut self) -> &mut Self { ... }
    fn collect<B>(self) -> B where B: FromIterator<Self::Item> { ... }
    fn partition<B, F>(self, f: F) -> (B, B) where F: FnMut(&Self::Item) -> bool, B: Default + Extend<Self::Item> { ... }
    fn fold<B, F>(self, init: B, f: F) -> B where F: FnMut(B, Self::Item) -> B { ... }
    fn all<F>(&mut self, f: F) -> bool where F: FnMut(Self::Item) -> bool { ... }
    fn any<F>(&mut self, f: F) -> bool where F: FnMut(Self::Item) -> bool { ... }
    fn find<P>(&mut self, predicate: P) -> Option<Self::Item> where P: FnMut(&Self::Item) -> bool { ... }
    fn position<P>(&mut self, predicate: P) -> Option<usize> where P: FnMut(Self::Item) -> bool { ... }
    fn rposition<P>(&mut self, predicate: P) -> Option<usize> where Self: ExactSizeIterator + DoubleEndedIterator, P: FnMut(Self::Item) -> bool { ... }
    fn max(self) -> Option<Self::Item> where Self::Item: Ord { ... }
    fn min(self) -> Option<Self::Item> where Self::Item: Ord { ... }
    fn max_by<B, F>(self, f: F) -> Option<Self::Item> where F: FnMut(&Self::Item) -> B, B: Ord { ... }
    fn max_by_key<B, F>(self, f: F) -> Option<Self::Item> where F: FnMut(&Self::Item) -> B, B: Ord { ... }
    fn min_by<B, F>(self, f: F) -> Option<Self::Item> where F: FnMut(&Self::Item) -> B, B: Ord { ... }
    fn min_by_key<B, F>(self, f: F) -> Option<Self::Item> where F: FnMut(&Self::Item) -> B, B: Ord { ... }
    fn rev(self) -> Rev<Self> where Self: DoubleEndedIterator { ... }
    fn unzip<A, B, FromA, FromB>(self) -> (FromA, FromB) where Self: Iterator<Item=(A, B)>, FromB: Default + Extend<B>, FromA: Default + Extend<A> { ... }
    fn cloned<'a, T>(self) -> Cloned<Self> where T: 'a + Clone, Self: Iterator<Item=&'a T> { ... }
    fn cycle(self) -> Cycle<Self> where Self: Clone { ... }
    fn sum<S = Self::Item>(self) -> S where S: Add<Self::Item, Output=S> + Zero { ... }
    fn product<P = Self::Item>(self) -> P where P: Mul<Self::Item, Output=P> + One { ... }
    fn cmp<I>(self, other: I) -> Ordering where I: IntoIterator<Item=Self::Item>, Self::Item: Ord { ... }
    fn partial_cmp<I>(self, other: I) -> Option<Ordering> where I: IntoIterator, Self::Item: PartialOrd<I::Item> { ... }
    fn eq<I>(self, other: I) -> bool where I: IntoIterator, Self::Item: PartialEq<I::Item> { ... }
    fn ne<I>(self, other: I) -> bool where I: IntoIterator, Self::Item: PartialEq<I::Item> { ... }
    fn lt<I>(self, other: I) -> bool where I: IntoIterator, Self::Item: PartialOrd<I::Item> { ... }
    fn le<I>(self, other: I) -> bool where I: IntoIterator, Self::Item: PartialOrd<I::Item> { ... }
    fn gt<I>(self, other: I) -> bool where I: IntoIterator, Self::Item: PartialOrd<I::Item> { ... }
    fn ge<I>(self, other: I) -> bool where I: IntoIterator, Self::Item: PartialOrd<I::Item> { ... }
}

An interface for dealing with iterators.

This is the main iterator trait. For more about the concept of iterators generally, please see the module-level documentation. In particular, you may want to know how to implement Iterator.

Associated Types

type Item

The type of the elements being iterated over.

Required Methods

fn next(&mut self) -> Option<Self::Item>

Advances the iterator and returns the next value.

Returns None when iteration is finished. Individual iterator implementations may choose to resume iteration, and so calling next() again may or may not eventually start returning Some(Item) again at some point.

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; let mut iter = a.iter(); // A call to next() returns the next value... assert_eq!(Some(&1), iter.next()); assert_eq!(Some(&2), iter.next()); assert_eq!(Some(&3), iter.next()); // ... and then None once it's over. assert_eq!(None, iter.next()); // More calls may or may not return None. Here, they always will. assert_eq!(None, iter.next()); assert_eq!(None, iter.next()); }

let a = [1, 2, 3];

let mut iter = a.iter();

// A call to next() returns the next value...
assert_eq!(Some(&1), iter.next());
assert_eq!(Some(&2), iter.next());
assert_eq!(Some(&3), iter.next());

// ... and then None once it's over.
assert_eq!(None, iter.next());

// More calls may or may not return None. Here, they always will.
assert_eq!(None, iter.next());
assert_eq!(None, iter.next());

Provided Methods

fn size_hint(&self) -> (usize, Option<usize>)

Returns the bounds on the remaining length of the iterator.

Specifically, size_hint() returns a tuple where the first element is the lower bound, and the second element is the upper bound.

The second half of the tuple that is returned is an Option<usize>. A None here means that either there is no known upper bound, or the upper bound is larger than usize.

Implementation notes

It is not enforced that an iterator implementation yields the declared number of elements. A buggy iterator may yield less than the lower bound or more than the upper bound of elements.

size_hint() is primarily intended to be used for optimizations such as reserving space for the elements of the iterator, but must not be trusted to e.g. omit bounds checks in unsafe code. An incorrect implementation of size_hint() should not lead to memory safety violations.

That said, the implementation should provide a correct estimation, because otherwise it would be a violation of the trait's protocol.

The default implementation returns (0, None) which is correct for any iterator.

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; let iter = a.iter(); assert_eq!((3, Some(3)), iter.size_hint()); }

let a = [1, 2, 3];
let iter = a.iter();

assert_eq!((3, Some(3)), iter.size_hint());

A more complex example:

fn main() { // The even numbers from zero to ten. let iter = (0..10).filter(|x| x % 2 == 0); // We might iterate from zero to ten times. Knowing that it's five // exactly wouldn't be possible without executing filter(). assert_eq!((0, Some(10)), iter.size_hint()); // Let's add one five more numbers with chain() let iter = (0..10).filter(|x| x % 2 == 0).chain(15..20); // now both bounds are increased by five assert_eq!((5, Some(15)), iter.size_hint()); }

// The even numbers from zero to ten.
let iter = (0..10).filter(|x| x % 2 == 0);

// We might iterate from zero to ten times. Knowing that it's five
// exactly wouldn't be possible without executing filter().
assert_eq!((0, Some(10)), iter.size_hint());

// Let's add one five more numbers with chain()
let iter = (0..10).filter(|x| x % 2 == 0).chain(15..20);

// now both bounds are increased by five
assert_eq!((5, Some(15)), iter.size_hint());

Returning None for an upper bound:

fn main() { // an infinite iterator has no upper bound let iter = 0..; assert_eq!((0, None), iter.size_hint()); }

// an infinite iterator has no upper bound
let iter = 0..;

assert_eq!((0, None), iter.size_hint());

fn count(self) -> usize

Consumes the iterator, counting the number of iterations and returning it.

This method will evaluate the iterator until its next() returns None. Once None is encountered, count() returns the number of times it called next().

Overflow Behavior

The method does no guarding against overflows, so counting elements of an iterator with more than usize::MAX elements either produces the wrong result or panics. If debug assertions are enabled, a panic is guaranteed.

Panics

This function might panic if the iterator has more than usize::MAX elements.

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; assert_eq!(a.iter().count(), 3); let a = [1, 2, 3, 4, 5]; assert_eq!(a.iter().count(), 5); }

let a = [1, 2, 3];
assert_eq!(a.iter().count(), 3);

let a = [1, 2, 3, 4, 5];
assert_eq!(a.iter().count(), 5);

fn last(self) -> Option<Self::Item>

Consumes the iterator, returning the last element.

This method will evaluate the iterator until it returns None. While doing so, it keeps track of the current element. After None is returned, last() will then return the last element it saw.

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; assert_eq!(a.iter().last(), Some(&3)); let a = [1, 2, 3, 4, 5]; assert_eq!(a.iter().last(), Some(&5)); }

let a = [1, 2, 3];
assert_eq!(a.iter().last(), Some(&3));

let a = [1, 2, 3, 4, 5];
assert_eq!(a.iter().last(), Some(&5));

fn nth(&mut self, n: usize) -> Option<Self::Item>

Consumes the n first elements of the iterator, then returns the next() one.

This method will evaluate the iterator n times, discarding those elements. After it does so, it will call next() and return its value.

Like most indexing operations, the count starts from zero, so nth(0) returns the first value, nth(1) the second, and so on.

nth() will return None if n is larger than the length of the iterator.

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; assert_eq!(a.iter().nth(1), Some(&2)); }

let a = [1, 2, 3];
assert_eq!(a.iter().nth(1), Some(&2));

Calling nth() multiple times doesn't rewind the iterator:

fn main() { let a = [1, 2, 3]; let mut iter = a.iter(); assert_eq!(iter.nth(1), Some(&2)); assert_eq!(iter.nth(1), None); }

let a = [1, 2, 3];

let mut iter = a.iter();

assert_eq!(iter.nth(1), Some(&2));
assert_eq!(iter.nth(1), None);

Returning None if there are less than n elements:

fn main() { let a = [1, 2, 3]; assert_eq!(a.iter().nth(10), None); }

let a = [1, 2, 3];
assert_eq!(a.iter().nth(10), None);

fn chain<U>(self, other: U) -> Chain<Self, U::IntoIter> where U: IntoIterator<Item=Self::Item>

Takes two iterators and creates a new iterator over both in sequence.

chain() will return a new iterator which will first iterate over values from the first iterator and then over values from the second iterator.

In other words, it links two iterators together, in a chain. 🔗

Examples

Basic usage:

fn main() { let a1 = [1, 2, 3]; let a2 = [4, 5, 6]; let mut iter = a1.iter().chain(a2.iter()); assert_eq!(iter.next(), Some(&1)); assert_eq!(iter.next(), Some(&2)); assert_eq!(iter.next(), Some(&3)); assert_eq!(iter.next(), Some(&4)); assert_eq!(iter.next(), Some(&5)); assert_eq!(iter.next(), Some(&6)); assert_eq!(iter.next(), None); }

let a1 = [1, 2, 3];
let a2 = [4, 5, 6];

let mut iter = a1.iter().chain(a2.iter());

assert_eq!(iter.next(), Some(&1));
assert_eq!(iter.next(), Some(&2));
assert_eq!(iter.next(), Some(&3));
assert_eq!(iter.next(), Some(&4));
assert_eq!(iter.next(), Some(&5));
assert_eq!(iter.next(), Some(&6));
assert_eq!(iter.next(), None);

Since the argument to chain() uses IntoIterator, we can pass anything that can be converted into an Iterator, not just an Iterator itself. For example, slices (&[T]) implement IntoIterator, and so can be passed to chain() directly:

fn main() { let s1 = &[1, 2, 3]; let s2 = &[4, 5, 6]; let mut iter = s1.iter().chain(s2); assert_eq!(iter.next(), Some(&1)); assert_eq!(iter.next(), Some(&2)); assert_eq!(iter.next(), Some(&3)); assert_eq!(iter.next(), Some(&4)); assert_eq!(iter.next(), Some(&5)); assert_eq!(iter.next(), Some(&6)); assert_eq!(iter.next(), None); }

let s1 = &[1, 2, 3];
let s2 = &[4, 5, 6];

let mut iter = s1.iter().chain(s2);

assert_eq!(iter.next(), Some(&1));
assert_eq!(iter.next(), Some(&2));
assert_eq!(iter.next(), Some(&3));
assert_eq!(iter.next(), Some(&4));
assert_eq!(iter.next(), Some(&5));
assert_eq!(iter.next(), Some(&6));
assert_eq!(iter.next(), None);

fn zip<U>(self, other: U) -> Zip<Self, U::IntoIter> where U: IntoIterator

'Zips up' two iterators into a single iterator of pairs.

zip() returns a new iterator that will iterate over two other iterators, returning a tuple where the first element comes from the first iterator, and the second element comes from the second iterator.

In other words, it zips two iterators together, into a single one. 🤐

When either iterator returns None, all further calls to next() will return None.

Examples

Basic usage:

fn main() { let a1 = [1, 2, 3]; let a2 = [4, 5, 6]; let mut iter = a1.iter().zip(a2.iter()); assert_eq!(iter.next(), Some((&1, &4))); assert_eq!(iter.next(), Some((&2, &5))); assert_eq!(iter.next(), Some((&3, &6))); assert_eq!(iter.next(), None); }

let a1 = [1, 2, 3];
let a2 = [4, 5, 6];

let mut iter = a1.iter().zip(a2.iter());

assert_eq!(iter.next(), Some((&1, &4)));
assert_eq!(iter.next(), Some((&2, &5)));
assert_eq!(iter.next(), Some((&3, &6)));
assert_eq!(iter.next(), None);

Since the argument to zip() uses IntoIterator, we can pass anything that can be converted into an Iterator, not just an Iterator itself. For example, slices (&[T]) implement IntoIterator, and so can be passed to zip() directly:

fn main() { let s1 = &[1, 2, 3]; let s2 = &[4, 5, 6]; let mut iter = s1.iter().zip(s2); assert_eq!(iter.next(), Some((&1, &4))); assert_eq!(iter.next(), Some((&2, &5))); assert_eq!(iter.next(), Some((&3, &6))); assert_eq!(iter.next(), None); }

let s1 = &[1, 2, 3];
let s2 = &[4, 5, 6];

let mut iter = s1.iter().zip(s2);

assert_eq!(iter.next(), Some((&1, &4)));
assert_eq!(iter.next(), Some((&2, &5)));
assert_eq!(iter.next(), Some((&3, &6)));
assert_eq!(iter.next(), None);

zip() is often used to zip an infinite iterator to a finite one. This works because the finite iterator will eventually return None, ending the zipper. Zipping with (0..) can look a lot like enumerate():

fn main() { let enumerate: Vec<_> = "foo".chars().enumerate().collect(); let zipper: Vec<_> = (0..).zip("foo".chars()).collect(); assert_eq!((0, 'f'), enumerate[0]); assert_eq!((0, 'f'), zipper[0]); assert_eq!((1, 'o'), enumerate[1]); assert_eq!((1, 'o'), zipper[1]); assert_eq!((2, 'o'), enumerate[2]); assert_eq!((2, 'o'), zipper[2]); }

let enumerate: Vec<_> = "foo".chars().enumerate().collect();

let zipper: Vec<_> = (0..).zip("foo".chars()).collect();

assert_eq!((0, 'f'), enumerate[0]);
assert_eq!((0, 'f'), zipper[0]);

assert_eq!((1, 'o'), enumerate[1]);
assert_eq!((1, 'o'), zipper[1]);

assert_eq!((2, 'o'), enumerate[2]);
assert_eq!((2, 'o'), zipper[2]);

fn map<B, F>(self, f: F) -> Map<Self, F> where F: FnMut(Self::Item) -> B

Takes a closure and creates an iterator which calls that closure on each element.

map() transforms one iterator into another, by means of its argument: something that implements FnMut. It produces a new iterator which calls this closure on each element of the original iterator.

If you are good at thinking in types, you can think of map() like this: If you have an iterator that gives you elements of some type A, and you want an iterator of some other type B, you can use map(), passing a closure that takes an A and returns a B.

map() is conceptually similar to a for loop. However, as map() is lazy, it is best used when you're already working with other iterators. If you're doing some sort of looping for a side effect, it's considered more idiomatic to use for than map().

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; let mut iter = a.into_iter().map(|x| 2 * x); assert_eq!(iter.next(), Some(2)); assert_eq!(iter.next(), Some(4)); assert_eq!(iter.next(), Some(6)); assert_eq!(iter.next(), None); }

let a = [1, 2, 3];

let mut iter = a.into_iter().map(|x| 2 * x);

assert_eq!(iter.next(), Some(2));
assert_eq!(iter.next(), Some(4));
assert_eq!(iter.next(), Some(6));
assert_eq!(iter.next(), None);

If you're doing some sort of side effect, prefer for to map():

fn main() { #![allow(unused_must_use)] // don't do this: (0..5).map(|x| println!("{}", x)); // it won't even execute, as it is lazy. Rust will warn you about this. // Instead, use for: for x in 0..5 { println!("{}", x); } }

// don't do this:
(0..5).map(|x| println!("{}", x));

// it won't even execute, as it is lazy. Rust will warn you about this.

// Instead, use for:
for x in 0..5 {
    println!("{}", x);
}

fn filter<P>(self, predicate: P) -> Filter<Self, P> where P: FnMut(&Self::Item) -> bool

Creates an iterator which uses a closure to determine if an element should be yielded.

The closure must return true or false. filter() creates an iterator which calls this closure on each element. If the closure returns true, then the element is returned. If the closure returns false, it will try again, and call the closure on the next element, seeing if it passes the test.

Examples

Basic usage:

fn main() { let a = [0i32, 1, 2]; let mut iter = a.into_iter().filter(|x| x.is_positive()); assert_eq!(iter.next(), Some(&1)); assert_eq!(iter.next(), Some(&2)); assert_eq!(iter.next(), None); }

let a = [0i32, 1, 2];

let mut iter = a.into_iter().filter(|x| x.is_positive());

assert_eq!(iter.next(), Some(&1));
assert_eq!(iter.next(), Some(&2));
assert_eq!(iter.next(), None);

Because the closure passed to filter() takes a reference, and many iterators iterate over references, this leads to a possibly confusing situation, where the type of the closure is a double reference:

fn main() { let a = [0, 1, 2]; let mut iter = a.into_iter().filter(|x| **x > 1); // need two *s! assert_eq!(iter.next(), Some(&2)); assert_eq!(iter.next(), None); }

let a = [0, 1, 2];

let mut iter = a.into_iter().filter(|x| **x > 1); // need two *s!

assert_eq!(iter.next(), Some(&2));
assert_eq!(iter.next(), None);

It's common to instead use destructuring on the argument to strip away one:

fn main() { let a = [0, 1, 2]; let mut iter = a.into_iter().filter(|&x| *x > 1); // both & and * assert_eq!(iter.next(), Some(&2)); assert_eq!(iter.next(), None); }

let a = [0, 1, 2];

let mut iter = a.into_iter().filter(|&x| *x > 1); // both & and *

assert_eq!(iter.next(), Some(&2));
assert_eq!(iter.next(), None);

or both:

fn main() { let a = [0, 1, 2]; let mut iter = a.into_iter().filter(|&&x| x > 1); // two &s assert_eq!(iter.next(), Some(&2)); assert_eq!(iter.next(), None); }

let a = [0, 1, 2];

let mut iter = a.into_iter().filter(|&&x| x > 1); // two &s

assert_eq!(iter.next(), Some(&2));
assert_eq!(iter.next(), None);

of these layers.

fn filter_map<B, F>(self, f: F) -> FilterMap<Self, F> where F: FnMut(Self::Item) -> Option<B>

Creates an iterator that both filters and maps.

The closure must return an Option<T>. filter_map() creates an iterator which calls this closure on each element. If the closure returns Some(element), then that element is returned. If the closure returns None, it will try again, and call the closure on the next element, seeing if it will return Some.

Why filter_map() and not just filter().map()? The key is in this part:

If the closure returns Some(element), then that element is returned.

In other words, it removes the Option<T> layer automatically. If your mapping is already returning an Option<T> and you want to skip over Nones, then filter_map() is much, much nicer to use.

Examples

Basic usage:

fn main() { let a = ["1", "2", "lol"]; let mut iter = a.iter().filter_map(|s| s.parse().ok()); assert_eq!(iter.next(), Some(1)); assert_eq!(iter.next(), Some(2)); assert_eq!(iter.next(), None); }

let a = ["1", "2", "lol"];

let mut iter = a.iter().filter_map(|s| s.parse().ok());

assert_eq!(iter.next(), Some(1));
assert_eq!(iter.next(), Some(2));
assert_eq!(iter.next(), None);

Here's the same example, but with filter() and map():

fn main() { let a = ["1", "2", "lol"]; let mut iter = a.iter() .map(|s| s.parse().ok()) .filter(|s| s.is_some()); assert_eq!(iter.next(), Some(Some(1))); assert_eq!(iter.next(), Some(Some(2))); assert_eq!(iter.next(), None); }

let a = ["1", "2", "lol"];

let mut iter = a.iter()
                .map(|s| s.parse().ok())
                .filter(|s| s.is_some());

assert_eq!(iter.next(), Some(Some(1)));
assert_eq!(iter.next(), Some(Some(2)));
assert_eq!(iter.next(), None);

There's an extra layer of Some in there.

fn enumerate(self) -> Enumerate<Self>

Creates an iterator which gives the current iteration count as well as the next value.

The iterator returned yields pairs (i, val), where i is the current index of iteration and val is the value returned by the iterator.

enumerate() keeps its count as a usize. If you want to count by a different sized integer, the zip() function provides similar functionality.

Overflow Behavior

The method does no guarding against overflows, so enumerating more than usize::MAX elements either produces the wrong result or panics. If debug assertions are enabled, a panic is guaranteed.

Panics

The returned iterator might panic if the to-be-returned index would overflow a usize.

Examples

fn main() { let a = [1, 2, 3]; let mut iter = a.iter().enumerate(); assert_eq!(iter.next(), Some((0, &1))); assert_eq!(iter.next(), Some((1, &2))); assert_eq!(iter.next(), Some((2, &3))); assert_eq!(iter.next(), None); }

let a = [1, 2, 3];

let mut iter = a.iter().enumerate();

assert_eq!(iter.next(), Some((0, &1)));
assert_eq!(iter.next(), Some((1, &2)));
assert_eq!(iter.next(), Some((2, &3)));
assert_eq!(iter.next(), None);

fn peekable(self) -> Peekable<Self>

Creates an iterator which can look at the next() element without consuming it.

Adds a peek() method to an iterator. See its documentation for more information.

Examples

Basic usage:

fn main() { let xs = [1, 2, 3]; let mut iter = xs.iter().peekable(); // peek() lets us see into the future assert_eq!(iter.peek(), Some(&&1)); assert_eq!(iter.next(), Some(&1)); assert_eq!(iter.next(), Some(&2)); // we can peek() multiple times, the iterator won't advance assert_eq!(iter.peek(), Some(&&3)); assert_eq!(iter.peek(), Some(&&3)); assert_eq!(iter.next(), Some(&3)); // after the iterator is finished, so is peek() assert_eq!(iter.peek(), None); assert_eq!(iter.next(), None); }

let xs = [1, 2, 3];

let mut iter = xs.iter().peekable();

// peek() lets us see into the future
assert_eq!(iter.peek(), Some(&&1));
assert_eq!(iter.next(), Some(&1));

assert_eq!(iter.next(), Some(&2));

// we can peek() multiple times, the iterator won't advance
assert_eq!(iter.peek(), Some(&&3));
assert_eq!(iter.peek(), Some(&&3));

assert_eq!(iter.next(), Some(&3));

// after the iterator is finished, so is peek()
assert_eq!(iter.peek(), None);
assert_eq!(iter.next(), None);

fn skip_while<P>(self, predicate: P) -> SkipWhile<Self, P> where P: FnMut(&Self::Item) -> bool

Creates an iterator that skip()s elements based on a predicate.

skip_while() takes a closure as an argument. It will call this closure on each element of the iterator, and ignore elements until it returns false.

After false is returned, skip_while()'s job is over, and the rest of the elements are yielded.

Examples

Basic usage:

fn main() { let a = [-1i32, 0, 1]; let mut iter = a.into_iter().skip_while(|x| x.is_negative()); assert_eq!(iter.next(), Some(&0)); assert_eq!(iter.next(), Some(&1)); assert_eq!(iter.next(), None); }

let a = [-1i32, 0, 1];

let mut iter = a.into_iter().skip_while(|x| x.is_negative());

assert_eq!(iter.next(), Some(&0));
assert_eq!(iter.next(), Some(&1));
assert_eq!(iter.next(), None);

Because the closure passed to skip_while() takes a reference, and many iterators iterate over references, this leads to a possibly confusing situation, where the type of the closure is a double reference:

fn main() { let a = [-1, 0, 1]; let mut iter = a.into_iter().skip_while(|x| **x < 0); // need two *s! assert_eq!(iter.next(), Some(&0)); assert_eq!(iter.next(), Some(&1)); assert_eq!(iter.next(), None); }

let a = [-1, 0, 1];

let mut iter = a.into_iter().skip_while(|x| **x < 0); // need two *s!

assert_eq!(iter.next(), Some(&0));
assert_eq!(iter.next(), Some(&1));
assert_eq!(iter.next(), None);

Stopping after an initial false:

fn main() { let a = [-1, 0, 1, -2]; let mut iter = a.into_iter().skip_while(|x| **x < 0); assert_eq!(iter.next(), Some(&0)); assert_eq!(iter.next(), Some(&1)); // while this would have been false, since we already got a false, // skip_while() isn't used any more assert_eq!(iter.next(), Some(&-2)); assert_eq!(iter.next(), None); }

let a = [-1, 0, 1, -2];

let mut iter = a.into_iter().skip_while(|x| **x < 0);

assert_eq!(iter.next(), Some(&0));
assert_eq!(iter.next(), Some(&1));

// while this would have been false, since we already got a false,
// skip_while() isn't used any more
assert_eq!(iter.next(), Some(&-2));

assert_eq!(iter.next(), None);

fn take_while<P>(self, predicate: P) -> TakeWhile<Self, P> where P: FnMut(&Self::Item) -> bool

Creates an iterator that yields elements based on a predicate.

take_while() takes a closure as an argument. It will call this closure on each element of the iterator, and yield elements while it returns true.

After false is returned, take_while()'s job is over, and the rest of the elements are ignored.

Examples

Basic usage:

fn main() { let a = [-1i32, 0, 1]; let mut iter = a.into_iter().take_while(|x| x.is_negative()); assert_eq!(iter.next(), Some(&-1)); assert_eq!(iter.next(), None); }

let a = [-1i32, 0, 1];

let mut iter = a.into_iter().take_while(|x| x.is_negative());

assert_eq!(iter.next(), Some(&-1));
assert_eq!(iter.next(), None);

Because the closure passed to take_while() takes a reference, and many iterators iterate over references, this leads to a possibly confusing situation, where the type of the closure is a double reference:

fn main() { let a = [-1, 0, 1]; let mut iter = a.into_iter().take_while(|x| **x < 0); // need two *s! assert_eq!(iter.next(), Some(&-1)); assert_eq!(iter.next(), None); }

let a = [-1, 0, 1];

let mut iter = a.into_iter().take_while(|x| **x < 0); // need two *s!

assert_eq!(iter.next(), Some(&-1));
assert_eq!(iter.next(), None);

Stopping after an initial false:

fn main() { let a = [-1, 0, 1, -2]; let mut iter = a.into_iter().take_while(|x| **x < 0); assert_eq!(iter.next(), Some(&-1)); // We have more elements that are less than zero, but since we already // got a false, take_while() isn't used any more assert_eq!(iter.next(), None); }

let a = [-1, 0, 1, -2];

let mut iter = a.into_iter().take_while(|x| **x < 0);

assert_eq!(iter.next(), Some(&-1));

// We have more elements that are less than zero, but since we already
// got a false, take_while() isn't used any more
assert_eq!(iter.next(), None);

fn skip(self, n: usize) -> Skip<Self>

Creates an iterator that skips the first n elements.

After they have been consumed, the rest of the elements are yielded.

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; let mut iter = a.iter().skip(2); assert_eq!(iter.next(), Some(&3)); assert_eq!(iter.next(), None); }

let a = [1, 2, 3];

let mut iter = a.iter().skip(2);

assert_eq!(iter.next(), Some(&3));
assert_eq!(iter.next(), None);

fn take(self, n: usize) -> Take<Self>

Creates an iterator that yields its first n elements.

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; let mut iter = a.iter().take(2); assert_eq!(iter.next(), Some(&1)); assert_eq!(iter.next(), Some(&2)); assert_eq!(iter.next(), None); }

let a = [1, 2, 3];

let mut iter = a.iter().take(2);

assert_eq!(iter.next(), Some(&1));
assert_eq!(iter.next(), Some(&2));
assert_eq!(iter.next(), None);

take() is often used with an infinite iterator, to make it finite:

fn main() { let mut iter = (0..).take(3); assert_eq!(iter.next(), Some(0)); assert_eq!(iter.next(), Some(1)); assert_eq!(iter.next(), Some(2)); assert_eq!(iter.next(), None); }

let mut iter = (0..).take(3);

assert_eq!(iter.next(), Some(0));
assert_eq!(iter.next(), Some(1));
assert_eq!(iter.next(), Some(2));
assert_eq!(iter.next(), None);

fn scan<St, B, F>(self, initial_state: St, f: F) -> Scan<Self, St, F> where F: FnMut(&mut St, Self::Item) -> Option<B>

An iterator similar to fold(), with internal state.

scan() accumulates a final value, similar to fold(), but instead of passing along an accumulator, it maintains the accumulator internally.

On each iteraton of scan(), you can assign to the internal state, and a mutable reference to the state is passed as the first argument to the closure, allowing you to modify it on each iteration.

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; let mut iter = a.iter().scan(1, |state, &x| { // each iteration, we'll multiply the state by the element *state = *state * x; // the value passed on to the next iteration Some(*state) }); assert_eq!(iter.next(), Some(1)); assert_eq!(iter.next(), Some(2)); assert_eq!(iter.next(), Some(6)); assert_eq!(iter.next(), None); }

let a = [1, 2, 3];

let mut iter = a.iter().scan(1, |state, &x| {
    // each iteration, we'll multiply the state by the element
    *state = *state * x;

    // the value passed on to the next iteration
    Some(*state)
});

assert_eq!(iter.next(), Some(1));
assert_eq!(iter.next(), Some(2));
assert_eq!(iter.next(), Some(6));
assert_eq!(iter.next(), None);

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F> where F: FnMut(Self::Item) -> U, U: IntoIterator

Creates an iterator that works like map, but flattens nested structure.

The map() adapter is very useful, but only when the closure argument produces values. If it produces an iterator instead, there's an extra layer of indirection. flat_map() will remove this extra layer on its own.

Another way of thinking about flat_map(): map()'s closure returns one item for each element, and flat_map()'s closure returns an iterator for each element.

Examples

Basic usage:

fn main() { let words = ["alpha", "beta", "gamma"]; // chars() returns an iterator let merged: String = words.iter() .flat_map(|s| s.chars()) .collect(); assert_eq!(merged, "alphabetagamma"); }

let words = ["alpha", "beta", "gamma"];

// chars() returns an iterator
let merged: String = words.iter()
                          .flat_map(|s| s.chars())
                          .collect();
assert_eq!(merged, "alphabetagamma");

fn fuse(self) -> Fuse<Self>

Creates an iterator which ends after the first None.

After an iterator returns None, future calls may or may not yield Some(T) again. fuse() adapts an iterator, ensuring that after a None is given, it will always return None forever.

Examples

Basic usage:

fn main() { // an iterator which alternates between Some and None struct Alternate { state: i32, } impl Iterator for Alternate { type Item = i32; fn next(&mut self) -> Option<i32> { let val = self.state; self.state = self.state + 1; // if it's even, Some(i32), else None if val % 2 == 0 { Some(val) } else { None } } } let mut iter = Alternate { state: 0 }; // we can see our iterator going back and forth assert_eq!(iter.next(), Some(0)); assert_eq!(iter.next(), None); assert_eq!(iter.next(), Some(2)); assert_eq!(iter.next(), None); // however, once we fuse it... let mut iter = iter.fuse(); assert_eq!(iter.next(), Some(4)); assert_eq!(iter.next(), None); // it will always return None after the first time. assert_eq!(iter.next(), None); assert_eq!(iter.next(), None); assert_eq!(iter.next(), None); }

// an iterator which alternates between Some and None
struct Alternate {
    state: i32,
}

impl Iterator for Alternate {
    type Item = i32;

    fn next(&mut self) -> Option<i32> {
        let val = self.state;
        self.state = self.state + 1;

        // if it's even, Some(i32), else None
        if val % 2 == 0 {
            Some(val)
        } else {
            None
        }
    }
}

let mut iter = Alternate { state: 0 };

// we can see our iterator going back and forth
assert_eq!(iter.next(), Some(0));
assert_eq!(iter.next(), None);
assert_eq!(iter.next(), Some(2));
assert_eq!(iter.next(), None);

// however, once we fuse it...
let mut iter = iter.fuse();

assert_eq!(iter.next(), Some(4));
assert_eq!(iter.next(), None);

// it will always return None after the first time.
assert_eq!(iter.next(), None);
assert_eq!(iter.next(), None);
assert_eq!(iter.next(), None);

fn inspect<F>(self, f: F) -> Inspect<Self, F> where F: FnMut(&Self::Item) -> ()

Do something with each element of an iterator, passing the value on.

When using iterators, you'll often chain several of them together. While working on such code, you might want to check out what's happening at various parts in the pipeline. To do that, insert a call to inspect().

It's much more common for inspect() to be used as a debugging tool than to exist in your final code, but never say never.

Examples

Basic usage:

fn main() { let a = [1, 4, 2, 3]; // this iterator sequence is complex. let sum = a.iter() .cloned() .filter(|&x| x % 2 == 0) .fold(0, |sum, i| sum + i); println!("{}", sum); // let's add some inspect() calls to investigate what's happening let sum = a.iter() .cloned() .inspect(|x| println!("about to filter: {}", x)) .filter(|&x| x % 2 == 0) .inspect(|x| println!("made it through filter: {}", x)) .fold(0, |sum, i| sum + i); println!("{}", sum); }

let a = [1, 4, 2, 3];

// this iterator sequence is complex.
let sum = a.iter()
            .cloned()
            .filter(|&x| x % 2 == 0)
            .fold(0, |sum, i| sum + i);

println!("{}", sum);

// let's add some inspect() calls to investigate what's happening
let sum = a.iter()
            .cloned()
            .inspect(|x| println!("about to filter: {}", x))
            .filter(|&x| x % 2 == 0)
            .inspect(|x| println!("made it through filter: {}", x))
            .fold(0, |sum, i| sum + i);

println!("{}", sum);

This will print:

about to filter: 1
about to filter: 4
made it through filter: 4
about to filter: 2
made it through filter: 2
about to filter: 3
6

fn by_ref(&mut self) -> &mut Self

Borrows an iterator, rather than consuming it.

This is useful to allow applying iterator adaptors while still retaining ownership of the original iterator.

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; let iter = a.into_iter(); let sum: i32 = iter.take(5) .fold(0, |acc, &i| acc + i ); assert_eq!(sum, 6); // if we try to use iter again, it won't work. The following line // gives "error: use of moved value: `iter` // assert_eq!(iter.next(), None); // let's try that again let a = [1, 2, 3]; let mut iter = a.into_iter(); // instead, we add in a .by_ref() let sum: i32 = iter.by_ref() .take(2) .fold(0, |acc, &i| acc + i ); assert_eq!(sum, 3); // now this is just fine: assert_eq!(iter.next(), Some(&3)); assert_eq!(iter.next(), None); }

let a = [1, 2, 3];

let iter = a.into_iter();

let sum: i32 = iter.take(5)
                   .fold(0, |acc, &i| acc + i );

assert_eq!(sum, 6);

// if we try to use iter again, it won't work. The following line
// gives "error: use of moved value: `iter`
// assert_eq!(iter.next(), None);

// let's try that again
let a = [1, 2, 3];

let mut iter = a.into_iter();

// instead, we add in a .by_ref()
let sum: i32 = iter.by_ref()
                   .take(2)
                   .fold(0, |acc, &i| acc + i );

assert_eq!(sum, 3);

// now this is just fine:
assert_eq!(iter.next(), Some(&3));
assert_eq!(iter.next(), None);

fn collect<B>(self) -> B where B: FromIterator<Self::Item>

Transforms an iterator into a collection.

collect() can take anything iterable, and turn it into a relevant collection. This is one of the more powerful methods in the standard library, used in a variety of contexts.

The most basic pattern in which collect() is used is to turn one collection into another. You take a collection, call iter() on it, do a bunch of transformations, and then collect() at the end.

One of the keys to collect()'s power is that many things you might not think of as 'collections' actually are. For example, a String is a collection of chars. And a collection of Result<T, E> can be thought of as single [Result<Collection<T>, E>]. See the examples below for more.

Because collect() is so general, it can cause problems with type inference. As such, collect() is one of the few times you'll see the syntax affectionately known as the 'turbofish': ::<>. This helps the inference algorithm understand specifically which collection you're trying to collect into.

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; let doubled: Vec<i32> = a.iter() .map(|&x| x * 2) .collect(); assert_eq!(vec![2, 4, 6], doubled); }

let a = [1, 2, 3];

let doubled: Vec<i32> = a.iter()
                         .map(|&x| x * 2)
                         .collect();

assert_eq!(vec![2, 4, 6], doubled);

Note that we needed the : Vec<i32> on the left-hand side. This is because we could collect into, for example, a VecDeque<T> instead:

fn main() { use std::collections::VecDeque; let a = [1, 2, 3]; let doubled: VecDeque<i32> = a.iter() .map(|&x| x * 2) .collect(); assert_eq!(2, doubled[0]); assert_eq!(4, doubled[1]); assert_eq!(6, doubled[2]); }

use std::collections::VecDeque;

let a = [1, 2, 3];

let doubled: VecDeque<i32> = a.iter()
                              .map(|&x| x * 2)
                              .collect();

assert_eq!(2, doubled[0]);
assert_eq!(4, doubled[1]);
assert_eq!(6, doubled[2]);

Using the 'turbofish' instead of annotationg doubled:

fn main() { let a = [1, 2, 3]; let doubled = a.iter() .map(|&x| x * 2) .collect::<Vec<i32>>(); assert_eq!(vec![2, 4, 6], doubled); }

let a = [1, 2, 3];

let doubled = a.iter()
               .map(|&x| x * 2)
               .collect::<Vec<i32>>();

assert_eq!(vec![2, 4, 6], doubled);

Because collect() cares about what you're collecting into, you can still use a partial type hint, _, with the turbofish:

fn main() { let a = [1, 2, 3]; let doubled = a.iter() .map(|&x| x * 2) .collect::<Vec<_>>(); assert_eq!(vec![2, 4, 6], doubled); }

let a = [1, 2, 3];

let doubled = a.iter()
               .map(|&x| x * 2)
               .collect::<Vec<_>>();

assert_eq!(vec![2, 4, 6], doubled);

Using collect() to make a String:

fn main() { let chars = ['g', 'd', 'k', 'k', 'n']; let hello: String = chars.iter() .map(|&x| x as u8) .map(|x| (x + 1) as char) .collect(); assert_eq!("hello", hello); }

let chars = ['g', 'd', 'k', 'k', 'n'];

let hello: String = chars.iter()
                         .map(|&x| x as u8)
                         .map(|x| (x + 1) as char)
                         .collect();

assert_eq!("hello", hello);

If you have a list of Result<T, E>s, you can use collect() to see if any of them failed:

fn main() { let results = [Ok(1), Err("nope"), Ok(3), Err("bad")]; let result: Result<Vec<_>, &str> = results.iter().cloned().collect(); // gives us the first error assert_eq!(Err("nope"), result); let results = [Ok(1), Ok(3)]; let result: Result<Vec<_>, &str> = results.iter().cloned().collect(); // gives us the list of answers assert_eq!(Ok(vec![1, 3]), result); }

let results = [Ok(1), Err("nope"), Ok(3), Err("bad")];

let result: Result<Vec<_>, &str> = results.iter().cloned().collect();

// gives us the first error
assert_eq!(Err("nope"), result);

let results = [Ok(1), Ok(3)];

let result: Result<Vec<_>, &str> = results.iter().cloned().collect();

// gives us the list of answers
assert_eq!(Ok(vec![1, 3]), result);

fn partition<B, F>(self, f: F) -> (B, B) where F: FnMut(&Self::Item) -> bool, B: Default + Extend<Self::Item>

Consumes an iterator, creating two collections from it.

The predicate passed to partition() can return true, or false. partition() returns a pair, all of the elements for which it returned true, and all of the elements for which it returned false.

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; let (even, odd): (Vec<i32>, Vec<i32>) = a.into_iter() .partition(|&n| n % 2 == 0); assert_eq!(even, vec![2]); assert_eq!(odd, vec![1, 3]); }

let a = [1, 2, 3];

let (even, odd): (Vec<i32>, Vec<i32>) = a.into_iter()
                                         .partition(|&n| n % 2 == 0);

assert_eq!(even, vec![2]);
assert_eq!(odd, vec![1, 3]);

fn fold<B, F>(self, init: B, f: F) -> B where F: FnMut(B, Self::Item) -> B

An iterator adaptor that applies a function, producing a single, final value.

fold() takes two arguments: an initial value, and a closure with two arguments: an 'accumulator', and an element. It returns the value that the accumulator should have for the next iteration.

The initial value is the value the accumulator will have on the first call.

After applying this closure to every element of the iterator, fold() returns the accumulator.

This operation is sometimes called 'reduce' or 'inject'.

Folding is useful whenever you have a collection of something, and want to produce a single value from it.

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; // the sum of all of the elements of a let sum = a.iter() .fold(0, |acc, &x| acc + x); assert_eq!(sum, 6); }

let a = [1, 2, 3];

// the sum of all of the elements of a
let sum = a.iter()
           .fold(0, |acc, &x| acc + x);

assert_eq!(sum, 6);

Let's walk through each step of the iteration here:

element	acc	x	result
	0
1	0	1	1
2	1	2	3
3	3	3	6

And so, our final result, 6.

It's common for people who haven't used iterators a lot to use a for loop with a list of things to build up a result. Those can be turned into fold()s:

fn main() { let numbers = [1, 2, 3, 4, 5]; let mut result = 0; // for loop: for i in &numbers { result = result + i; } // fold: let result2 = numbers.iter().fold(0, |acc, &x| acc + x); // they're the same assert_eq!(result, result2); }

let numbers = [1, 2, 3, 4, 5];

let mut result = 0;

// for loop:
for i in &numbers {
    result = result + i;
}

// fold:
let result2 = numbers.iter().fold(0, |acc, &x| acc + x);

// they're the same
assert_eq!(result, result2);

fn all<F>(&mut self, f: F) -> bool where F: FnMut(Self::Item) -> bool

Tests if every element of the iterator matches a predicate.

all() takes a closure that returns true or false. It applies this closure to each element of the iterator, and if they all return true, then so does all(). If any of them return false, it returns false.

all() is short-circuting; in other words, it will stop processing as soon as it finds a false, given that no matter what else happens, the result will also be false.

An empty iterator returns true.

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; assert!(a.iter().all(|&x| x > 0)); assert!(!a.iter().all(|&x| x > 2)); }

let a = [1, 2, 3];

assert!(a.iter().all(|&x| x > 0));

assert!(!a.iter().all(|&x| x > 2));

Stopping at the first false:

fn main() { let a = [1, 2, 3]; let mut iter = a.iter(); assert!(!iter.all(|&x| x != 2)); // we can still use `iter`, as there are more elements. assert_eq!(iter.next(), Some(&3)); }

let a = [1, 2, 3];

let mut iter = a.iter();

assert!(!iter.all(|&x| x != 2));

// we can still use `iter`, as there are more elements.
assert_eq!(iter.next(), Some(&3));

fn any<F>(&mut self, f: F) -> bool where F: FnMut(Self::Item) -> bool

Tests if any element of the iterator matches a predicate.

any() takes a closure that returns true or false. It applies this closure to each element of the iterator, and if any of them return true, then so does any(). If they all return false, it returns false.

any() is short-circuting; in other words, it will stop processing as soon as it finds a true, given that no matter what else happens, the result will also be true.

An empty iterator returns false.

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; assert!(a.iter().any(|&x| x > 0)); assert!(!a.iter().any(|&x| x > 5)); }

let a = [1, 2, 3];

assert!(a.iter().any(|&x| x > 0));

assert!(!a.iter().any(|&x| x > 5));

Stopping at the first true:

fn main() { let a = [1, 2, 3]; let mut iter = a.iter(); assert!(iter.any(|&x| x != 2)); // we can still use `iter`, as there are more elements. assert_eq!(iter.next(), Some(&2)); }

let a = [1, 2, 3];

let mut iter = a.iter();

assert!(iter.any(|&x| x != 2));

// we can still use `iter`, as there are more elements.
assert_eq!(iter.next(), Some(&2));

fn find<P>(&mut self, predicate: P) -> Option<Self::Item> where P: FnMut(&Self::Item) -> bool

Searches for an element of an iterator that satisfies a predicate.

find() takes a closure that returns true or false. It applies this closure to each element of the iterator, and if any of them return true, then find() returns Some(element). If they all return false, it returns None.

find() is short-circuting; in other words, it will stop processing as soon as the closure returns true.

Because find() takes a reference, and many iterators iterate over references, this leads to a possibly confusing situation where the argument is a double reference. You can see this effect in the examples below, with &&x.

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; assert_eq!(a.iter().find(|&&x| x == 2), Some(&2)); assert_eq!(a.iter().find(|&&x| x == 5), None); }

let a = [1, 2, 3];

assert_eq!(a.iter().find(|&&x| x == 2), Some(&2));

assert_eq!(a.iter().find(|&&x| x == 5), None);

Stopping at the first true:

fn main() { let a = [1, 2, 3]; let mut iter = a.iter(); assert_eq!(iter.find(|&&x| x == 2), Some(&2)); // we can still use `iter`, as there are more elements. assert_eq!(iter.next(), Some(&3)); }

let a = [1, 2, 3];

let mut iter = a.iter();

assert_eq!(iter.find(|&&x| x == 2), Some(&2));

// we can still use `iter`, as there are more elements.
assert_eq!(iter.next(), Some(&3));

fn position<P>(&mut self, predicate: P) -> Option<usize> where P: FnMut(Self::Item) -> bool

Searches for an element in an iterator, returning its index.

position() takes a closure that returns true or false. It applies this closure to each element of the iterator, and if one of them returns true, then position() returns Some(index). If all of them return false, it returns None.

position() is short-circuting; in other words, it will stop processing as soon as it finds a true.

Overflow Behavior

The method does no guarding against overflows, so if there are more than usize::MAX non-matching elements, it either produces the wrong result or panics. If debug assertions are enabled, a panic is guaranteed.

Panics

This function might panic if the iterator has more than usize::MAX non-matching elements.

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; assert_eq!(a.iter().position(|&x| x == 2), Some(1)); assert_eq!(a.iter().position(|&x| x == 5), None); }

let a = [1, 2, 3];

assert_eq!(a.iter().position(|&x| x == 2), Some(1));

assert_eq!(a.iter().position(|&x| x == 5), None);

Stopping at the first true:

fn main() { let a = [1, 2, 3]; let mut iter = a.iter(); assert_eq!(iter.position(|&x| x == 2), Some(1)); // we can still use `iter`, as there are more elements. assert_eq!(iter.next(), Some(&3)); }

let a = [1, 2, 3];

let mut iter = a.iter();

assert_eq!(iter.position(|&x| x == 2), Some(1));

// we can still use `iter`, as there are more elements.
assert_eq!(iter.next(), Some(&3));

fn rposition<P>(&mut self, predicate: P) -> Option<usize> where Self: ExactSizeIterator + DoubleEndedIterator, P: FnMut(Self::Item) -> bool

Searches for an element in an iterator from the right, returning its index.

rposition() takes a closure that returns true or false. It applies this closure to each element of the iterator, starting from the end, and if one of them returns true, then rposition() returns Some(index). If all of them return false, it returns None.

rposition() is short-circuting; in other words, it will stop processing as soon as it finds a true.

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; assert_eq!(a.iter().rposition(|&x| x == 3), Some(2)); assert_eq!(a.iter().rposition(|&x| x == 5), None); }

let a = [1, 2, 3];

assert_eq!(a.iter().rposition(|&x| x == 3), Some(2));

assert_eq!(a.iter().rposition(|&x| x == 5), None);

Stopping at the first true:

fn main() { let a = [1, 2, 3]; let mut iter = a.iter(); assert_eq!(iter.rposition(|&x| x == 2), Some(1)); // we can still use `iter`, as there are more elements. assert_eq!(iter.next(), Some(&1)); }

let a = [1, 2, 3];

let mut iter = a.iter();

assert_eq!(iter.rposition(|&x| x == 2), Some(1));

// we can still use `iter`, as there are more elements.
assert_eq!(iter.next(), Some(&1));

fn max(self) -> Option<Self::Item> where Self::Item: Ord

Returns the maximum element of an iterator.

If the two elements are equally maximum, the latest element is returned.

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; assert_eq!(a.iter().max(), Some(&3)); }

let a = [1, 2, 3];

assert_eq!(a.iter().max(), Some(&3));

fn min(self) -> Option<Self::Item> where Self::Item: Ord

Returns the minimum element of an iterator.

If the two elements are equally minimum, the first element is returned.

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; assert_eq!(a.iter().min(), Some(&1)); }

let a = [1, 2, 3];

assert_eq!(a.iter().min(), Some(&1));

fn max_by<B, F>(self, f: F) -> Option<Self::Item> where F: FnMut(&Self::Item) -> B, B: Ord

Deprecated since 1.6.0

: renamed to max_by_key

fn max_by_key<B, F>(self, f: F) -> Option<Self::Item> where F: FnMut(&Self::Item) -> B, B: Ord

Returns the element that gives the maximum value from the specified function.

Returns the rightmost element if the comparison determines two elements to be equally maximum.

Examples

fn main() { let a = [-3_i32, 0, 1, 5, -10]; assert_eq!(*a.iter().max_by_key(|x| x.abs()).unwrap(), -10); }

let a = [-3_i32, 0, 1, 5, -10];
assert_eq!(*a.iter().max_by_key(|x| x.abs()).unwrap(), -10);

fn min_by<B, F>(self, f: F) -> Option<Self::Item> where F: FnMut(&Self::Item) -> B, B: Ord

Deprecated since 1.6.0

: renamed to min_by_key

fn min_by_key<B, F>(self, f: F) -> Option<Self::Item> where F: FnMut(&Self::Item) -> B, B: Ord

Returns the element that gives the minimum value from the specified function.

Returns the latest element if the comparison determines two elements to be equally minimum.

Examples

fn main() { let a = [-3_i32, 0, 1, 5, -10]; assert_eq!(*a.iter().min_by_key(|x| x.abs()).unwrap(), 0); }

let a = [-3_i32, 0, 1, 5, -10];
assert_eq!(*a.iter().min_by_key(|x| x.abs()).unwrap(), 0);

fn rev(self) -> Rev<Self> where Self: DoubleEndedIterator

Reverses an iterator's direction.

Usually, iterators iterate from left to right. After using rev(), an iterator will instead iterate from right to left.

This is only possible if the iterator has an end, so rev() only works on DoubleEndedIterators.

Examples

fn main() { let a = [1, 2, 3]; let mut iter = a.iter().rev(); assert_eq!(iter.next(), Some(&3)); assert_eq!(iter.next(), Some(&2)); assert_eq!(iter.next(), Some(&1)); assert_eq!(iter.next(), None); }

let a = [1, 2, 3];

let mut iter = a.iter().rev();

assert_eq!(iter.next(), Some(&3));
assert_eq!(iter.next(), Some(&2));
assert_eq!(iter.next(), Some(&1));

assert_eq!(iter.next(), None);

fn unzip<A, B, FromA, FromB>(self) -> (FromA, FromB) where Self: Iterator<Item=(A, B)>, FromB: Default + Extend<B>, FromA: Default + Extend<A>

Converts an iterator of pairs into a pair of containers.

unzip() consumes an entire iterator of pairs, producing two collections: one from the left elements of the pairs, and one from the right elements.

This function is, in some sense, the opposite of zip().

Examples

Basic usage:

fn main() { let a = [(1, 2), (3, 4)]; let (left, right): (Vec<_>, Vec<_>) = a.iter().cloned().unzip(); assert_eq!(left, [1, 3]); assert_eq!(right, [2, 4]); }

let a = [(1, 2), (3, 4)];

let (left, right): (Vec<_>, Vec<_>) = a.iter().cloned().unzip();

assert_eq!(left, [1, 3]);
assert_eq!(right, [2, 4]);

fn cloned<'a, T>(self) -> Cloned<Self> where T: 'a + Clone, Self: Iterator<Item=&'a T>

Creates an iterator which clone()s all of its elements.

This is useful when you have an iterator over &T, but you need an iterator over T.

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; let v_cloned: Vec<_> = a.iter().cloned().collect(); // cloned is the same as .map(|&x| x), for integers let v_map: Vec<_> = a.iter().map(|&x| x).collect(); assert_eq!(v_cloned, vec![1, 2, 3]); assert_eq!(v_map, vec![1, 2, 3]); }

let a = [1, 2, 3];

let v_cloned: Vec<_> = a.iter().cloned().collect();

// cloned is the same as .map(|&x| x), for integers
let v_map: Vec<_> = a.iter().map(|&x| x).collect();

assert_eq!(v_cloned, vec![1, 2, 3]);
assert_eq!(v_map, vec![1, 2, 3]);

fn cycle(self) -> Cycle<Self> where Self: Clone

Repeats an iterator endlessly.

Instead of stopping at None, the iterator will instead start again, from the beginning. After iterating again, it will start at the beginning again. And again. And again. Forever.

Examples

Basic usage:

fn main() { let a = [1, 2, 3]; let mut it = a.iter().cycle(); assert_eq!(it.next(), Some(&1)); assert_eq!(it.next(), Some(&2)); assert_eq!(it.next(), Some(&3)); assert_eq!(it.next(), Some(&1)); assert_eq!(it.next(), Some(&2)); assert_eq!(it.next(), Some(&3)); assert_eq!(it.next(), Some(&1)); }

let a = [1, 2, 3];

let mut it = a.iter().cycle();

assert_eq!(it.next(), Some(&1));
assert_eq!(it.next(), Some(&2));
assert_eq!(it.next(), Some(&3));
assert_eq!(it.next(), Some(&1));
assert_eq!(it.next(), Some(&2));
assert_eq!(it.next(), Some(&3));
assert_eq!(it.next(), Some(&1));

fn sum<S = Self::Item>(self) -> S where S: Add<Self::Item, Output=S> + Zero

Unstable (iter_arith #27739)

: bounds recently changed

Sums the elements of an iterator.

Takes each element, adds them together, and returns the result.

An empty iterator returns the zero value of the type.

Examples

Basic usage:

#![feature(iter_arith)] fn main() { let a = [1, 2, 3]; let sum: i32 = a.iter().sum(); assert_eq!(sum, 6); }

#![feature(iter_arith)]

let a = [1, 2, 3];
let sum: i32 = a.iter().sum();

assert_eq!(sum, 6);

fn product<P = Self::Item>(self) -> P where P: Mul<Self::Item, Output=P> + One

Unstable (iter_arith #27739)

: bounds recently changed

Iterates over the entire iterator, multiplying all the elements

An empty iterator returns the one value of the type.

Examples

#![feature(iter_arith)] fn main() { fn factorial(n: u32) -> u32 { (1..).take_while(|&i| i <= n).product() } assert_eq!(factorial(0), 1); assert_eq!(factorial(1), 1); assert_eq!(factorial(5), 120); }

#![feature(iter_arith)]

fn factorial(n: u32) -> u32 {
    (1..).take_while(|&i| i <= n).product()
}
assert_eq!(factorial(0), 1);
assert_eq!(factorial(1), 1);
assert_eq!(factorial(5), 120);

fn cmp<I>(self, other: I) -> Ordering where I: IntoIterator<Item=Self::Item>, Self::Item: Ord

Lexicographically compares the elements of this Iterator with those of another.

fn partial_cmp<I>(self, other: I) -> Option<Ordering> where I: IntoIterator, Self::Item: PartialOrd<I::Item>

Lexicographically compares the elements of this Iterator with those of another.

fn eq<I>(self, other: I) -> bool where I: IntoIterator, Self::Item: PartialEq<I::Item>

Determines if the elements of this Iterator are equal to those of another.

fn ne<I>(self, other: I) -> bool where I: IntoIterator, Self::Item: PartialEq<I::Item>

Determines if the elements of this Iterator are unequal to those of another.

fn lt<I>(self, other: I) -> bool where I: IntoIterator, Self::Item: PartialOrd<I::Item>

Determines if the elements of this Iterator are lexicographically less than those of another.

fn le<I>(self, other: I) -> bool where I: IntoIterator, Self::Item: PartialOrd<I::Item>

Determines if the elements of this Iterator are lexicographically less or equal to those of another.

fn gt<I>(self, other: I) -> bool where I: IntoIterator, Self::Item: PartialOrd<I::Item>

Determines if the elements of this Iterator are lexicographically greater than those of another.

fn ge<I>(self, other: I) -> bool where I: IntoIterator, Self::Item: PartialOrd<I::Item>

Determines if the elements of this Iterator are lexicographically greater than or equal to those of another.

Implementors

• impl Iterator for EscapeUnicode
• impl Iterator for EscapeDefault
• impl<'a, I> Iterator for &'a mut I where I: Iterator + ?Sized
• impl<I> Iterator for Rev<I> where I: DoubleEndedIterator
• impl<'a, I, T> Iterator for Cloned<I> where T: 'a + Clone, I: Iterator<Item=&'a T>
• impl<I> Iterator for Cycle<I> where I: Clone + Iterator
• impl<A, B> Iterator for Chain<A, B> where A: Iterator, B: Iterator<Item=A::Item>
• impl<A, B> Iterator for Zip<A, B> where A: Iterator, B: Iterator
• impl<B, I, F> Iterator for Map<I, F> where I: Iterator, F: FnMut(I::Item) -> B
• impl<I, P> Iterator for Filter<I, P> where P: FnMut(&I::Item) -> bool, I: Iterator
• impl<B, I, F> Iterator for FilterMap<I, F> where F: FnMut(I::Item) -> Option<B>, I: Iterator
• impl<I> Iterator for Enumerate<I> where I: Iterator
• impl<I> Iterator for Peekable<I> where I: Iterator
• impl<I, P> Iterator for SkipWhile<I, P> where P: FnMut(&I::Item) -> bool, I: Iterator
• impl<I, P> Iterator for TakeWhile<I, P> where P: FnMut(&I::Item) -> bool, I: Iterator
• impl<I> Iterator for Skip<I> where I: Iterator
• impl<I> Iterator for Take<I> where I: Iterator
• impl<B, I, St, F> Iterator for Scan<I, St, F> where I: Iterator, F: FnMut(&mut St, I::Item) -> Option<B>
• impl<I, U, F> Iterator for FlatMap<I, U, F> where U: IntoIterator, F: FnMut(I::Item) -> U, I: Iterator
• impl<I> Iterator for Fuse<I> where I: Iterator
• impl<I, F> Iterator for Inspect<I, F> where F: FnMut(&I::Item) -> (), I: Iterator
• impl<A> Iterator for StepBy<A, RangeFrom<A>> where A: Clone, &'a A: Add<&'a A>, &'a A::Output == A
• impl<A> Iterator for RangeInclusive<A> where A: PartialEq<A> + Step + One + Clone, &'a A: Add<&'a A>, &'a A::Output == A
• impl<A> Iterator for StepBy<A, Range<A>> where A: Zero + Clone + Step
• impl<A> Iterator for Range<A> where A: One + Step, &'a A: Add<&'a A>, &'a A::Output == A
• impl<A> Iterator for RangeFrom<A> where A: One + Step, &'a A: Add<&'a A>, &'a A::Output == A
• impl<A> Iterator for Repeat<A> where A: Clone
• impl<T> Iterator for Empty<T>
• impl<T> Iterator for Once<T>
• impl<A> Iterator for Item<A>
• impl<'a, A> Iterator for Iter<'a, A>
• impl<'a, A> Iterator for IterMut<'a, A>
• impl<A> Iterator for IntoIter<A>
• impl<'a, T> Iterator for Iter<'a, T>
• impl<'a, T> Iterator for IterMut<'a, T>
• impl<T> Iterator for IntoIter<T>
• impl<'a, T> Iterator for Iter<'a, T>
• impl<'a, T> Iterator for IterMut<'a, T>
• impl<'a, T, P> Iterator for Split<'a, T, P> where P: FnMut(&T) -> bool
• impl<'a, T, P> Iterator for SplitMut<'a, T, P> where P: FnMut(&T) -> bool
• impl<T, I> Iterator for GenericSplitN<I> where I: SplitIter<Item=T>
• impl<'a, T, P> Iterator for SplitN<'a, T, P> where P: FnMut(&T) -> bool
• impl<'a, T, P> Iterator for RSplitN<'a, T, P> where P: FnMut(&T) -> bool
• impl<'a, T, P> Iterator for SplitNMut<'a, T, P> where P: FnMut(&T) -> bool
• impl<'a, T, P> Iterator for RSplitNMut<'a, T, P> where P: FnMut(&T) -> bool
• impl<'a, T> Iterator for Windows<'a, T>
• impl<'a, T> Iterator for Chunks<'a, T>
• impl<'a, T> Iterator for ChunksMut<'a, T>
• impl<'a> Iterator for Chars<'a>
• impl<'a> Iterator for CharIndices<'a>
• impl<'a> Iterator for Bytes<'a>
• impl<'a, P> Iterator for Split<'a, P> where P: Pattern<'a>
• impl<'a, P> Iterator for RSplit<'a, P> where P: Pattern<'a>, P::Searcher: ReverseSearcher<'a>
• impl<'a, P> Iterator for SplitTerminator<'a, P> where P: Pattern<'a>
• impl<'a, P> Iterator for RSplitTerminator<'a, P> where P: Pattern<'a>, P::Searcher: ReverseSearcher<'a>
• impl<'a, P> Iterator for SplitN<'a, P> where P: Pattern<'a>
• impl<'a, P> Iterator for RSplitN<'a, P> where P: Pattern<'a>, P::Searcher: ReverseSearcher<'a>
• impl<'a, P> Iterator for MatchIndices<'a, P> where P: Pattern<'a>
• impl<'a, P> Iterator for RMatchIndices<'a, P> where P: Pattern<'a>, P::Searcher: ReverseSearcher<'a>
• impl<'a, P> Iterator for Matches<'a, P> where P: Pattern<'a>
• impl<'a, P> Iterator for RMatches<'a, P> where P: Pattern<'a>, P::Searcher: ReverseSearcher<'a>
• impl<'a> Iterator for Lines<'a>
• impl<'a> Iterator for LinesAny<'a>
• impl<I> Iterator for Box<I> where I: Iterator + ?Sized
• impl<'a, T> Iterator for Iter<'a, T>
• impl<T> Iterator for IntoIter<T>
• impl<'a, T> Iterator for Drain<'a, T> where T: 'a
• impl<T> Iterator for RawItems<T>
• impl<K, V, E, Impl> Iterator for AbsTraversal<Impl> where Impl: TraversalImpl<Item=(K, V), Edge=E>
• impl<K, V, E, T> Iterator for AbsIter<T> where T: DoubleEndedIterator<Item=TraversalItem<K, V, E>> + Traverse<E>
• impl<'a, K, V> Iterator for Iter<'a, K, V>
• impl<'a, K, V> Iterator for IterMut<'a, K, V>
• impl<K, V> Iterator for IntoIter<K, V>
• impl<'a, K, V> Iterator for Keys<'a, K, V>
• impl<'a, K, V> Iterator for Values<'a, K, V>
• impl<'a, K, V> Iterator for Range<'a, K, V>
• impl<'a, K, V> Iterator for RangeMut<'a, K, V>
• impl<'a, T> Iterator for Iter<'a, T>
• impl<T> Iterator for IntoIter<T>
• impl<'a, T> Iterator for Range<'a, T>
• impl<'a, T> Iterator for Difference<'a, T> where T: Ord
• impl<'a, T> Iterator for SymmetricDifference<'a, T> where T: Ord
• impl<'a, T> Iterator for Intersection<'a, T> where T: Ord
• impl<'a, T> Iterator for Union<'a, T> where T: Ord
• impl<E> Iterator for Iter<E> where E: CLike
• impl<'a, A> Iterator for Iter<'a, A>
• impl<'a, A> Iterator for IterMut<'a, A>
• impl<A> Iterator for IntoIter<A>
• impl<'a> Iterator for Utf16Units<'a>
• impl<'a> Iterator for Drain<'a>
• impl<T> Iterator for IntoIter<T>
• impl<'a, T> Iterator for Drain<'a, T>
• impl<'a, T> Iterator for Iter<'a, T>
• impl<'a, T> Iterator for IterMut<'a, T>
• impl<T> Iterator for IntoIter<T>
• impl<'a, T> Iterator for Drain<'a, T> where T: 'a
• impl<'a> Iterator for Utf16Items<'a>
• impl<I> Iterator for Utf16Encoder<I> where I: Iterator<Item=char>
• impl<'a> Iterator for SplitWhitespace<'a>
• impl Iterator for ToLowercase
• impl Iterator for ToUppercase
• impl Iterator for CaseMappingIter
• impl<I> Iterator for DecodeUtf16<I> where I: Iterator<Item=u16>
• impl Iterator for EscapeDefault
• impl<'a, K, V> Iterator for Iter<'a, K, V>
• impl<'a, K, V> Iterator for IterMut<'a, K, V>
• impl<K, V> Iterator for IntoIter<K, V>
• impl<'a, K, V> Iterator for Keys<'a, K, V>
• impl<'a, K, V> Iterator for Values<'a, K, V>
• impl<'a, K, V> Iterator for Drain<'a, K, V>
• impl<'a, K> Iterator for Iter<'a, K>
• impl<K> Iterator for IntoIter<K>
• impl<'a, K> Iterator for Drain<'a, K>
• impl<'a, T, S> Iterator for Intersection<'a, T, S> where T: Eq + Hash, S: HashState
• impl<'a, T, S> Iterator for Difference<'a, T, S> where T: Eq + Hash, S: HashState
• impl<'a, T, S> Iterator for SymmetricDifference<'a, T, S> where T: Eq + Hash, S: HashState
• impl<'a, T, S> Iterator for Union<'a, T, S> where T: Eq + Hash, S: HashState
• impl Iterator for Vars
• impl Iterator for VarsOs
• impl<'a> Iterator for SplitPaths<'a>
• impl Iterator for Args
• impl Iterator for ArgsOs
• impl Iterator for ReadDir
• impl Iterator for WalkDir
• impl<R: Read> Iterator for Bytes<R>
• impl<R: Read> Iterator for Chars<R>
• impl<B: BufRead> Iterator for Split<B>
• impl<B: BufRead> Iterator for Lines<B>
• impl<'a> Iterator for Incoming<'a>
• impl Iterator for LookupHost
• impl<'a> Iterator for Iter<'a>
• impl<'a> Iterator for Components<'a>
• impl<'a, T> Iterator for Iter<'a, T>
• impl<T> Iterator for IntoIter<T>
• impl<'a, T, R> Iterator for Generator<'a, T, R> where T: Rand, R: Rng
• impl<'a, R> Iterator for AsciiGenerator<'a, R> where R: Rng